Lampunvaihto Acer X110P-projektoriin

Ohessa näet lampunvaihtovideon Acer X110P projektoriin. Vaihtotyö on vastaava myös muissa Acer-projektoreissa. Videolla koko lamppumoduuli vaihdetaan uuteen. Jos olet ostanut pelkän polttimon ilman moduulia, katso tämä pelkän polttimon vaihtovideo.

Subtitles transcription

Turn off the projector by pressing the Power switch
Let the projector cool down for at least 30 minutes
Unplug the projector
Remove the screws that hold the lamp’s cover
Take off the lamp’s cover
Remove the two screws that hold the lamp module
Pull out the lamp module
Unpack the new lamp
- If you purchased bare bulb without a module, check out our video Replacing a bare bulb in projector lamp module
- Be careful not to touch the bulb with bare hands.
- If necessary, use plastic gloves
Insert the new lamp and tighten it
Return and secure the cover back in its position
Plug the projector in and switch it on
Perform a reset of lamp hours. After switching the projector on, go to: Menu > Management > Lamp Hour Reset Press the button and choose "Yes" to turn the lamp hour counter to 0 hours.